氟膠夾布密封圈-James walker Solosele S
Solosele S is our highly popular unit seal of simple construction, specially designed for use with double-acting split piston heads.
Special features
1 Robust double-acting seal.
2 Compact unit that needs minimum housing space.
3 Recommended for medium to heavy duty applications.
4 Fully-moulded, one piece construction, with integral anti-extrusion elements for long life.
5 Should be used in conjunction with Lionsele B1 or B2 bearing strips to eliminate metalto- metal contact and other problems associated with offset pistons.
Materials of construction
Elastomeric core
Standard material: medium nitrile (NBR).
Special materials: low nitrile (NBR), or fluorocarbon (FKM).
Anti-extrusion elements
Standard material: cotton fabric proofed with blend of synthetic rubbers.
Special materials: cotton fabric proofed with blend of synthetic rubbers for use with seal core of low nitrile (NBR). Fabric proofed with fluorocarbon (FKM) for use with seal core of fluorocarbon (FKM).
Typical applications
Split piston heads in double-acting
hydraulic applications of medium to heavy
duty — especially where space is at a
premium.
Operating capabilities
• Maximum operating pressure:
42MPa (6092psi).
• Temperature range (standard
materials): -20°C to +120°C
(-4°F to +248°F).
• Temperature limits (special materials):
down to -45°C (-49°F) with low nitrile
(NBR); or up to +200°C (+392°F) with
fluoroelastomer (FKM).
• Maximum surface speed: 0.5m/s
(98.4fpm). For higher speeds please
consult our Technical Support Team
Media capabilities
Standard materials are suitable for use
with most mineral based hydraulic fluids,
and most fire-resistant fluids of the water/
oil emulsion or water/glycol types at
temperatures up to 120°C (248°F). They
also resist air, water, and most lubricating
oils and greases.
Special materials extend considerably
the range of application in terms of
temperature and fluid compatibility.
Please consult our Technical Support
Team.
